Instruction for operation and storage of wood products
Climatic conditions and environmental impact directly affect the appearance and performance of natural wood products. In order to avoid premature wear and tear of varnish and paint cover and deformation of wood elements, we recommend to read the rules of natural wood products’ operation.
By following these instructions, the products will retain their unique beauty and practicality for a long time.
RULES FOR OPERATION AND CONSERVATION OF PRODUCTS FOR INTERNAL PURPOSE
(indoor furniture, stairs and décor)
- Place the product on a level surface and use it for its intended purpose.
- Avoid direct sunlight for extended periods of time. It can affect the color saturation of the product and cause the wood to dry and crack.
- Avoid sudden fluctuations in temperature and humidity, as it will adversely affect the wood and may deform it.
- Position products not less than 1 m away from heating elements (radiators, heaters, etc.) Permissible temperature range + 10 ° C - + 27 ° C and relative humidity 40-65%.
- Always keep the surface of the product dry. If moisture or other liquids (coffee, wine, fat) get in, wipe the damp furniture with an absorbent cloth. Use soap solutions to clean.
- Never use hard brushes or sponges with abrasives for cleaning.
- Avoid the influence of aggressive liquids (acids, alkalis, solvents, etc.). Reaction with them can adversely affect the product and damage the protective layer and cause stains on the surface.
- Avoid hot items (pans, irons, etc.), be sure to use special linings or napkins for hot items.
- When disassembled, place the product on a level surface. Do not overload individual parts and evenly distribute all loads.
- Place the product on a level surface and use it for its intended purpose.
- If possible, install the product in the least sunny part of the area.
- Never use hard brushes or sponges with abrasives for cleaning.
- Avoid the influence of aggressive liquids (acids, alkalis, solvents, etc.). Reaction with them can adversely affect the product and damage the protective layer and cause stains on the surface.
- Avoid the effect of hot objects and open flames.
- Avoid the effects of irrigation systems on the elements and the product on the whole.
- During the operation of the product there may be slight cracking of the wood under the influence of the environment and partial manifestation of the sap (in the manufacture of coniferous wood) on the elements of the product, that is not a guarantee.
FOR STORAGE (without installation):
- Place the product in a dry area at a level surface. Do not overload individual parts and evenly distribute all loads.
- Avoid sudden fluctuations in temperature and humidity, as it will adversely affect the wood and may deform it.
- Position the products not less than 1 m away from the heating elements (radiators, heaters, etc.).
